Custom Sound and Design
SN 006
Senhelder Original JS5
Serial Number 006 has a sepele body, with a tiger maple cap. The neck is 4 piece maple, with a birdseye cap on the headstock (which is a custom design) and an ebony fingerboard. Pickups are Zhangbucker single coil type - custom wound for the neck and Paul Bunyon at the bridge. There is a master volume and tone plus a rotary 4 way switch for pickup selection offering bidge, combo in parallel, neck, and combo in series (grunt mode). Both pickups are bright, clear and ringing.
Click photos to enlarge.
 |  |  |  |
|---|---|---|---|
 |  |  |  |
Guitar Specifications
Body Type: J1.5, w cap, contoured for belly and arm
Body Material: Sapele/tiger maple, bookmatched
Thickness: 1-15/32"
Binding: none
Headstock: Fat Head
Neck material: 4 piece maple, w/ Birdseye cap on headstock
Neck Shape: C
Fingerboard: Ebony
Truss Rod: HR Low Profile
Scale Length: 25.5
Fingerboard radius: 9.5
Nut width: 1-3/4"
String Spacing at Nut: 1-1/2"
Fret Wire: 150 SS
Number Frets: 22
Inlays: Dots (abalone), 5, 7 mm Side Dots abalone
Pickup config: Two Single Coil
Neck Pickup: ZhangBucker Custom wound
Neck Pickup Spec: 9.2K Ohm A5
Bridge Pickup: ZhangBcker Paul Bunyou
Bridge Pickup Spec: 9.7K Ohm, A5
Electronics: volume, tone, 4 way rotary switch
String Height at Bridge: .50"
Bridge: Callaham Vintage Tele
Tuners: Gotoh
Knobs: Custom
Pickguard: none
Finish: Natural, Tru-oil
Setup String Gauge: .046 - .011 (hybrid)